Faceted Geometric Skull Ring – 925 Sterling Silver

Track the angular planes around the entire cranium

Large polygonal facets meet at hard ridges, while the sockets and short tooth row remain recognizable as a skull. The inspected front, side and rear views preserve this same construction rather than switching to a different ring.

Low poly describes the visible geometric treatment; it does not establish computer-generated manufacture, stone cutting or a gemstone surface. The planes catch light differently from a polished anatomical skull and can show wear most clearly along their ridges.

Keep facet ridges crisp without over-polishing

Wipe each plane lightly and avoid repeated heavy polishing across the meeting ridges. Put the ring on after dressing and remove it for machinery, lifting, impact work and snag-prone tasks. Published weight describes the current product record; it is not an impact or load rating.

Wipe raised silver with a soft cloth and use a soft dry brush in accessible recesses. Avoid sharp picks and repeated aggressive tarnish removal. Conservation guidance notes that polishing removes some silver, so intentional dark contrast and narrow relief channels should be treated with restraint.

Select the band before judging the 23 × 20 mm face

• Material: international-standard 925 sterling silver, as listed
• Published weight: approximately 24–35 g depending on ring size
• Listed size: 23 × 20 mm; axes are not defined
• Available fit: US 5 through 15, including listed half sizes
• Fit method: select from the live US size options and use the published diameter and circumference where shown

Measure the intended finger close to the time of wear and make sure the selected size can pass the knuckle. GIA guidance notes that ring width and finger shape influence fit. A substantial or projecting face may rotate when loose, but automatically sizing down can create a different problem at the knuckle.

Low-poly surface and size questions