Matte Black Side Skull Ring – 925 Sterling Silver

Preserve the low-sheen surface

Decide whether you want the skull facing toward or away from the body before selecting a finger, then check that the elongated face does not crowd its neighbor. Remove the ring for lifting, machinery, impact work and tasks where a raised edge could catch. Its published weight is retained exactly as a catalog fact and is not a load or impact rating.

Avoid high-pressure polishing that would make selected areas glossy or remove dark contrast; brush teeth and sockets gently. Canadian Conservation Institute guidance notes that polishing removes some silver, so use light pressure and avoid repeatedly stripping intentional dark contrast from recesses.

Follow the elongated cranium in profile

The forehead and rear cranium stretch backward from the face, creating a low horizontal silhouette rather than a front-facing skull mask.

Matte black describes the photographed low-sheen dark appearance. No coating type, plating thickness or permanent color guarantee is published. The inspected front, side and rear photographs keep the same ring identity and show how the relief joins the shank.

Choose orientation as well as ring size

• Material: 925 silver, as listed
• Published weight: approximately 24-35 g depending on ring size
• Listed size: 21 x 20 mm; axes are not defined
• Available fit: US 7 through 14, including listed half sizes
• Selection method: use the live US size selector and its published diameter and circumference references

Measure the intended finger near the time of wear and confirm that the chosen size can pass the knuckle. GIA guidance distinguishes sizing for narrow and wider rings because band width and finger shape can change perceived fit. A projecting face may rotate when loose, but automatically sizing down can make the knuckle passage too tight.

Matte finish, orientation and sizing questions