Battle-Damaged Batman Cowl Ring – 925 Sterling Silver

Center the pointed cowl above the knuckle

• Material: 925 silver, as listed
• Published weight: approximately 24-35 g depending on ring size
• Listed size: 28 x 19 mm; axes are not defined
• Available fit: US 7 through 14, including listed half sizes

The tall ears and cheek guards create a directional face that should stay centered without making knuckle passage tight. Measure the intended finger near the time of wear and make sure the chosen ring passes the knuckle. GIA sizing guidance treats band width, finger shape and measurement method as practical fit factors; a projecting face that rotates is not, by itself, proof that sizing down is safe.

Use the cracked brow and open lower mask as identifiers

A fracture line crosses one side of the forehead, while stepped eye ridges and long cheek guards create the mask profile. The side view shows armor-like plates continuing into the band.

Batman is retained only as the existing catalog name. No official license, studio affiliation, replica status or protective helmet function is claimed. The inspected front, side and worn views retain the same sculpture and shank identity.

Keep the pointed ears away from impact

The two ears can meet loose fabric or hard surfaces, so put the ring on after dressing and remove it for physical work.

Brush around the eye openings and crack relief, supporting the ring rather than pressing on an ear tip. Use a soft brush in recesses and light cloth pressure on raised planes. Canadian Conservation Institute guidance notes that polishing removes silver, so avoid repeatedly stripping intentional dark contrast.

Cowl profile, licensing and sizing questions