Open-Mouth Black Mamba Head Ring – 925 Silver

Follow the fangs from side view to open palate

Two long fangs project from the upper jaw while smaller teeth and a ribbed inner mouth remain visible from the front. The inspected front, side and rear views preserve this same construction rather than switching to a different ring.

The catalog name uses black mamba, but the images do not prove a biological species; customer copy therefore stays with the verified snake-head form. Brass eye accents are listed, but no coating, gemstone or separate eye-weight specification is published.

Protect the fangs and keep cleaners off assumptions

Clean around the eyes and inner jaw with a soft dry brush; do not use a dip based on an assumed eye treatment. Put the ring on after dressing and remove it for machinery, lifting, impact work and snag-prone tasks. Published weight describes the current product record; it is not an impact or load rating.

Wipe raised silver with a soft cloth and use a soft dry brush in accessible recesses. Avoid sharp picks and repeated aggressive tarnish removal. Conservation guidance notes that polishing removes some silver, so intentional dark contrast and narrow relief channels should be treated with restraint.

Account for the 42 g raised head

• Material: international-standard 925 sterling silver with brass eyes, as listed
• Published weight: 42 g
• Listed size: 32 × 27 mm; axes are not defined
• Available fit: US 5 through 15, including listed half sizes
• Fit method: select from the live US size options and use the published diameter and circumference where shown

Measure the intended finger close to the time of wear and make sure the selected size can pass the knuckle. GIA guidance notes that ring width and finger shape influence fit. A substantial or projecting face may rotate when loose, but automatically sizing down can create a different problem at the knuckle.

Open jaw, brass eye and fit questions