8mm Gear Toggle Hammered Cable Chain – 925 Silver

Choose one fixed width and seven possible lengths

• Material: 925 SILVER, as listed
• Width: 8.0 mm
• Lengths: 20, 21, 23, 25, 27, 29 or 31 inches / 50-80 cm
• Published weight range: 110-170g

Use a flexible tape or existing necklace to compare chest position at the live lengths. The weight is one shared range and should not be converted into an exact value for a selected length.

Before wear, pass the straight bar completely through the gear ring and verify that the chain has enough slack for the toggle to sit without continual leverage.

Use the toothed ring to separate this chain

Irregular pits and bright facets run across every oval link, while evenly spaced teeth define the circular front closure. A smooth tapered bar passes through the gear-shaped ring.

The rough surface is a design finish, not verified meteorite material. No exact weight-by-length map, load rating, automatic lock or pendant compatibility is published.

Clear debris from gear teeth and hammered pits

Inspect the toggle and joining links before use. Remove the chain for sleep, sports, machinery and activities that can pull the front closure.

Use a soft brush around the teeth and pitted links, dry every recess and store the necklace supported.

GIA care guidance supports inspection of closures; conservation guidance cautions against aggressive polishing that removes textured silver.

Inspect the complete piece under good light before wear so loose, bent or damaged details are noticed early. Store it separately from harder items that could strike the raised surfaces. Recheck the same high-contact points after extended wear.

Toggle operation, length and weight-range questions