Sexy Butt Ring for Men – 925 Silver Novelty Ring

Read the anatomy and banner as one sculpture

A central groove divides the rounded form while the banner crosses beneath it and continues toward both sides of the shank.

This is adult novelty styling. It is not intimate equipment, a body cast, a personalized portrait or a claim about the wearer. The inspected front, side and rear photographs keep the same ring identity and show how the relief joins the shank.

Protect the raised curves and banner edge

The tall rounded face can press against adjacent fingers or catch loose fabric when fit is not well centered. Remove the ring for lifting, machinery, impact work and tasks where a raised edge could catch. Its published weight is retained exactly as a catalog fact and is not a load or impact rating.

Wipe the broad raised surfaces lightly and brush along the banner edges and central groove. Canadian Conservation Institute guidance notes that polishing removes some silver, so use light pressure and avoid repeatedly stripping intentional dark contrast from recesses.

Center a tall 30 g novelty face

• Material: 92.5% sterling silver, as listed
• Published weight: 30 g
• Listed size: 32 x 18 mm; axes are not defined
• Available fit: US 6 through 14, including listed half sizes
• Selection method: use the live US size selector and its published diameter and circumference references

Measure the intended finger near the time of wear and confirm that the chosen size can pass the knuckle. GIA guidance distinguishes sizing for narrow and wider rings because band width and finger shape can change perceived fit. A projecting face may rotate when loose, but automatically sizing down can make the knuckle passage too tight.

Novelty design, scale and fit questions